Embedded Files
Bio motor oil / Bio gear oil
Renewable lubricants:
Bio-Synthetic SHP Motor Oil SAE 0W20 PCMO
Bio-Synthetic SHP Motor Oil SAE 0W30 PCMO
Bio-Synthetic SHP Motor Oil SAE 5W20 PCMO
Bio-Synthetic SHP Motor Oil SAE 5W30 PCMO
Bio-Synthetic SHP Motor Oil SAE 10W30 PCMO
Bio-Synthetic SHP Motor Oil SAE 10W40 PCMO
Bio-Synthetic HD SHP Motor Oil SAE 30 (10 TBN)
Bio-Synthetic HD SHP Motor Oil SAE 5W40 (10 TBN)
Bio-Synthetic HD SHP Motor Oil SAE 10W30 (10 TBN)
Bio-Synthetic HD SHP Motor Oil SAE 15W40 (12 TBN)
Bio-Synthetic HD SHP Motor Oil SAE 15W50 (10 TBN)
Bio-Synthetic HD SHP Motor Oil SAE 20W50 (10 TBN)
Bio-Synthetic 75W90 GL-4 Trans/Gear Oil
Bio-Synthetic 75W90 Gear Oil GL-5 LS
Bio-Synthetic 80W90 Gear Oil GL-5
Bio-SYNTHETIC ATF (Automatic Transmission Fluid)
Bio-Super High PerformanceTM Transmission Fluids SAE: 20
Biodiesel
Biodiesel in IBC or Biodiesel Tank
Density 15°C g/cm³
Viscosity 40°C mm²/s
Distillation % @ °C
Flashpoint (Fp) °C
CFPP °C
Cloud point °C
Sulphur mg/kg
CCR 100% %mass
Carbon residue (10%dist.residue) %mass
Sulphated ash %mass
Oxid ash %mass
Water mg/kg
Total contamination mg/kg
Cu corrosion max 3h/50°C
Oxidation stability hrs;110°C
Cetane number
Acid value mgKOH /g
Methanol %mass
Ester content %mass
Monoglyceride %mass
Diglyceride %mass
Triglyceride %mass
Free glycerol %mass
Total glycerol %mass
Iodine value
Linolenic acid ME %mass
C(x:4) & greater unsaturated esters %mass
Phosphorus mg/kg
Alkalinity mg/kg
Gp I metals (Na,K) mg/kg
GpII metals (Ca,Mg) mg/kg
PAHs %mass
Lubricity / wear µm at 60°C
40 Litre Biodiesel Tank
Conical Tank
Height:550mm
Height:1050mm (With Optional Frame)
Diameter: 460mm
Capacity: 40 litres
60 Litre Biodiesel Tank
Conical Tank
Height:680mm
Height:1180mm (With Optional Frame)
Diameter: 460mm
Capacity: 60 litres
120 Litre Biodiesel Tank
Conical Tank
Height:800mm
Height:1300mm (With Optional Frame)
Diameter: 550mm
Capacity: 120 litres
Cone weight: 6.5kg
130 Litre Biodiesel Tank
Conical Tank
Height:1000mm
Height:1500mm (With Optional Frame)
Diameter: 580mm
Capacity: 130 litres
200 Litre Biodiesel Tank
Conical Tank
Height:1250mm
Height:1750mm (With Optional Frame)
Diameter: 580mm
Capacity: 200 litres
220 Litre Biodiesel Tank
Conical Tank
Height:1200mm
Height:1700mm (With Optional Frame)
Diameter: 600mm
Capacity: 220 litres
900 Litre Biodiesel Tank
Conical Tank
Height:1500mm
Height:1950mm (With Optional Frame)
Diameter: 1000mm
Capacity: 900 litres
Cone Weight: 30kg
1,000L Natural Mauser IBC on a Wooden Pallet
- 4 way entry wooden pallet
- 2" Buttress Thread Butterfly Valve
- Available with 150mm Vented and Un-Vented Tops
- FDA approved
- Capacity: 1000 litre
- with a welded steel tube frame
- reusable plastic container
- relatively low purchase costs
- Excellent handling properties
- High stability
- Low tare weight fluctuations
- Best suited to conveyor belts, high rack storage areas and transport in ISO containers
- Weatherproof
- Environmentally friendly
- Suitable for all hazardous and non-hazardous liquids.
- Hot filling: maximum filling good temperature 65 °C, filled at ambient temperature.
- Can be stacked simply and efficiently for optimum use of storage space
- IBCs can be stacked two high during transport (Assuming a top load not exceeding 1650kg).
1,000L Natural Mauser IBC on a Composite Pallet
- 4 way entry composite pallet
- 2" Buttress Thread Butterfly Valve
- Available with 150mm Vented and Un-Vented Tops
- FDA approved
- Capacity: 1000 litre
- with a welded steel tube frame
- reusable plastic container
- relatively low purchase costs
- Excellent handling properties
- High stability
- Low tare weight fluctuations
- Best suited to conveyor belts, high rack storage areas and transport in ISO containers
- Weatherproof
- Environmentally friendly
- Suitable for all hazardous and non-hazardous liquids.
- Hot filling: maximum filling good temperature 65 °C, filled at ambient temperature.
- Can be stacked simply and efficiently for optimum use of storage space
- IBCs can be stacked two high during transport (Assuming a top load not exceeding 1650kg).
1,000L Natural Mauser IBC on a Plastic Pallet
- 4 way entry plastic pallet
- 2" Buttress Thread Butterfly Valve
- Available with 150mm Vented and Un-Vented Tops
- FDA approved
- Capacity: 1000 litre
- with a welded steel tube frame
- reusable plastic container
- relatively low purchase costs
- Excellent handling properties
- High stability
- Low tare weight fluctuations
- Best suited to conveyor belts, high rack storage areas and transport in ISO containers
- Weatherproof
- Environmentally friendly
- Suitable for all hazardous and non-hazardous liquids.
- Hot filling: maximum filling good temperature 65 °C, filled at ambient temperature.
- Can be stacked simply and efficiently for optimum use of storage space
- IBCs can be stacked two high during transport (Assuming a top load not exceeding 1650kg).
IBC Biodiesel Mount Pump
- Only suitable with diesel or biodiesel up to B100.
- Designed to fit most 1000L IBC's (Intermediate Bulk Containers).
- Pumping speed 50L/min. 230V.
- Meter accuracy +/-2%.
- 4m delivery hose, automatic nozzle & suction assembly.
- Built in nozzle holder.
- Bracket & nozzle can be padlocked.
- Max. run time 30 mins.
- Product warranty void if used with biodiesel not refined to EN14214 standard.
- When pumping B100 biodiesel at low temperatures the flow rate will be reduced.
- 230V continuously rated motor. Maximum run time on bypass = 2 minutes.
Biogas
Puxin Small Portable Solar Biogas digester
- PUXIN 2.0m3 portable digester
- desulfurizer
- biogas storage bag 1M3 (Material:PVC, Thickness:0.6mm, Size:1.5*2.2M, Pressure:0-5KPA, Weight: 8kg)
- biogas pump (Can charge by:Solar or 220 AC, Frequency 50Hz, Power:10 W, Maximum pressure(kgf/cm2)>0.12, Maximum Vacuum (-kpa) -0.085, Flow≥26 L/min, Load flow≥12(70 meter)L/min, Weight: 3.3kg)
- solar charger for Biogas pump
- biogas fitting (30m Φ9mm PVC soft pipe, 1pc pressure gauge 16KPa, 1pc desulpharize 1KG ,5pcs valve)
- gas pipeline and appliances
- High gas production rate: the gas production rate can reach 2-3m3 per day
- Easy and quick to install.
- Convenient to transport.
- Wide rang of fermentation material.
- High gas production rate.
- Weight: 100 kg.
Biogas compressor
- zw-5, natural gas compressor booster
- auto controll tank filling
- with PLC
- for CO2 Nitrogen, Hydrogen, Oxygen, Helium, Natural gas, Biogas
- be used in oil field and plant to take gas recovery, transportation and fill tank
- high pressure and oil free
- capacity 100Nm3/h
- pressure max 40bar 600psi
- engine power 15kw/20hp 380v/3/50-60hz
- tank for Natural gas, biogas, Methane, Nitrogen , air/water cooled, oil-free
Refuel station 50Nm3/h 3600psi
Standard Capacity( Nm3/h): 50.0; 15 GGE
Feed pressure Mpa: 0.1
Exhaust Pressure MPa(G): 20, 3000psi/ 25mpa, 3600psi
Inlet Temp C: 20
Cooling: air
motor: 380v 50hz, 230v 60hz, 3phase
Brand: DMC
Flow rate: 50Nm3/h 30cfm
filling time: 15minutes for 60L tank(200bar 3000psi)18minutes for 60L tank(250bar3600psi)
working pressure: 200bar/3000psi or 250bar/3600psi
Inlet pressure: Less than 0.3bar4.5psi
Motor power: EX18.5kw/25hp 50/60hz,three phase
Oil separator/oil filter: 2/1
safety valve/alarm sensor: 4 in each stage/option
time meter: manual/1
starter:
switch: auto stop/1
emergency stop:
condensate/gas drain: manual
filling hose connect: 2-4
dimensions(H-W-D): 1980-1700-1000mm
weight: 850kg
noise level: 80db(A)
Hydrogen gas
Hydrogen gas in steel cylinder
CO + CO2 < 1 ppm
Nitrogen < 4 ppm
Oxygen < 1 ppm
THC < 1 ppm
Water < 1 ppm
Seamless Steel Gas Cylinder for Hydrogen gas
Capacity of Cylinder: 6 Cubic Metre (Volumetric)
Water Capacity: 40.2 Litres
Hydraulic Test: 250 Kg per Sqcm. Pressure
Filling Pressure: 140-150 Kg per Sqcm.
Wall thickness of Cylinder: 5.7 ± 0.3 mm
Length of cylinder: 1250 mm.
Nominal diameter: 230-235 mm.
Tare weight: 47.0-50.0 Kgms.
IS Specification: 7285/2004
High Pressure Seamless Steel Hydrogen Gas Cylinder
- Type: ISO9809-1/GB5099 Seamless Steel Hydrogen Gas Cylinder
- Outside diameter : 108MM- 232mm
- Water capacity: 10L-80L
- Height: 850MM-1500mm
- Weight: 25KG-60kg
- Working pressure: 150BAR-230Bar
- Test pressure: 225BAR-345Bar
- Design wall thickness : 3.6MM- 6.0mm
- Material: 34CrMo4/37Mn
- Storage Gas: 1Cum3-11.5Cum3
Hydrogen compressor
- zw-5, natural gas compressor booster
- auto controll tank filling
- with PLC
- for CO2 Nitrogen, Hydrogen, Oxygen, Helium, Natural gas, Biogas
- be used in oil field and plant to take gas recovery, transportation and fill tank
- high pressure and oil free
- capacity: 10 Nm3/h
- pressure: max 300bar 4500psi
- engine power: 5.5kw/7.5hp 380v/3/50-60hz
- tank for Hydrogen, Oxygen, Helium, water cooled, oil-free
Google Sites
Report abuse